CUT-SECTION MODEL OF DEMONSTRATION CHASIS WORKING WITH ELECTIRCALS OF A MPFI VEHICLE:



Model No. MT-62.

FOUR STROKE DIESEL ENGINE SETUP (WORKING)

About MT-62 :
The Four stroke Diesel engine setup will be prepared by using good working condition multi cylinder diesel engine with all the fittings of the engine along with air filter, starter, battery, alternator, indication meters, fuel tank ,electrical wiring etc., all mounted on to a sturdy iron frame with caster wheels (mobile trolley) . All the fittings such as meter, fuel tank, radiator etc., along with the engine will be arrange on to the paint finished trolley with its original fittings such as rubber dampers and clamps so as to contain the vibrations. The wiring for the sensors, indication meters etc, will be done and painted with a single colour paint

  • a) Fuel Pump diaphragm type
  • b)Tata Car turbo charged Engine assembly with rotary type Fuel injection Pump
  • c)Mahindra 540 Engine assembly
  • d) Ambassador Isuzu Diesel Engine assembly
  • e) Tata Sumo Non Turbo Engine assembly
  • f) Tata Safari turbo charged engine assembly
  • g) Ford 1.4 ZXi
  • g) Hyundai Accent/ScorpioCRDI Engine assembly

Model No. MT-63.

FOUR STROKE SINGLE CYLINDER DIESEL ENGINE SETUP (WORKING)

  • About MT-63 :
    The Four stroke Diesel engine setup will be prepared by using good working condition Single cylinder diesel engine with all the fittings of the engine along with air filter, silencer,fuel filter, fuel tank etc., all mounted on to a sturdy iron frame with caster wheels (mobile trolley) . The engine will be painted with a single colour paint.



  • Model No. MT-64.

    FOUR STROKE PETROL ENGINE WITH CNG SETUP (WORKING CONDITION)

  • About MT-64
    The Four stroke petrol engine with CNG setup will be prepared by using good working condition multi cylinder car engine with all the fittings of the engine along with radiator, silencer, air filter, starter, battery, alternator, indication meters, fuel tank, CNG tank ,electrical wiring with ignition switch etc., all mounted on to a sturdy iron frame with caster wheels (mobile trolley). All the fittings such as meter, fuel tank, radiator etc., along with the engine will be arrange on to the paint finished trolley with its original fittings such as rubber dampers and clamps so as to contain the vibrations. The wiring for the sensors, indication meters etc, will be done so that by cranking the ignition the engine will start working, the indications such as alternator charging, oil pressure, temperature etc., will be displayed on to the necessary indication meter attached. The engine assembly will be serviced ,painted with a single colour paint. MPFI engines will be fitted with all necessary sensors, injectors and other MPFI accessories, ECU etc., which will be duly connected by its original wiring harness and will be made to work along with necessary indications.


    • a) Ambassodor Isuzu MPFI Engine With CNG setup
    • b)Maruthi 800 CC/Omni MPFI Engine With CNG setup
    • c)Mahindra 540 Engine assembly
    • d) Santro MPFI Engine With CNG setu
    • e) Maruthi OMNI/800 cc carburator Engine With CNG setup
    • f) Maruthi Zen/Alto/EsteemMPFI Engine With CNG setup
    • g) Maruthi Zen/Alto/Esteem(Carburator) Engine With CNG setup
    Model No. MT-65.

    FOUR STROKE PETROL ENGINE SETUP (WORKING CONDITION)

  • About MT-65:
    The Four stroke petrol engine setup will be prepared by using good working condition multi cylinder car engine with all the fittings of the engine along with radiator, silencer, air filter, starter, battery, alternator, indication meters, fuel tank ,electrical wiring with ignition switch etc., all mounted on to a sturdy iron frame with caster wheels (mobile trolley) .

    All the fittings such as meter, fuel tank, radiator etc., along with the engine will be arrange on to the paint finished trolley with its original fittings such as rubber dampers and clamps so as to contain the vibrations. The wiring for the sensors, indication meters etc, will be done so that by cranking the ignition the engine will start working, the indications such as alternator charging, oil pressure, temperature etc., will be displayed on to the necessary indication meter attached. The engine assembly will be serviced ,painted with a single colour paint.

    MPFI engines will be fitted with all necessary sensors, injectors and other MPFI accessories, ECU etc., which will be duly connected by its original wiring harness and will be made to work along with necessary indications. .

    • a) Ambassodor Isuzu MPFI Engine With CNG setup
    • b)Maruthi 800 CC/Omni MPFI Engine With CNG setup
    • c) Santro MPFI Engine With CNG setu
    • d) Maruthi OMNI/800 cc carburator Engine With CNG setup
    • e) Maruthi Zen/Alto/EsteemMPFI Engine With CNG setup
    • f) Maruthi Zen/Alto/Esteem(Carburator) Engine With CNG setup
    • g) Ambassodor Isuzu carburator Engine setup
  • Model No. MT-66.

    FOUR STROKE PETROL ENGINE SETUP (WORKING CONDITION)

  • About MT-66
    The two stroke petrol engine setup will be prepared by using good working condition engine with all the fittings of the engine along with silencer, air filter, fuel tank ,electrical wiring with ignition switch etc., all mounted on to a sturdy iron frame with caster wheels (mobile trolley) .

    All the fittings such as fuel tank, etc., along with the engine will be arrange on to the paint finished trolley with its original fittings such as rubber dampers and clamps so as to contain the vibrations.. The engine assembly will be serviced ,painted with a single colour paint.


    • a)Bajaj Chetak Engine assembly
    • b)Suzuki Samurai assembly
    • c) Yamaha engine assembly
    • d)TVS super XL (Electronic Ignition Engine)
    Model No. MT-67

    Petrol engine (4 stroke) of different makes in running condition – Bajaj/Hero Honda or Equivalent

  • About MT-67
    The Four stroke petrol engine setup will be prepared by using good working condition engine with all the fittings of the engine along with silencer, air filter, fuel tank ,electrical wiring with ignition switch etc., all mounted on to a sturdy iron frame with caster wheels (mobile trolley) .

    All the fittings such as fuel tank, etc., along with the engine will be arrange on to the paint finished trolley with its original fittings such as rubber dampers and clamps so as to contain the vibrations.. The engine assembly will be serviced ,painted with a single colour paint.


    • a)Bajaj Chetak Engine assembly
    • b)Hero Honda assembly

    Terms and conditions:

    • 1. Sales tax : extra.
    • 2. Supply : will be stated against specific enquiry.
    • 2. Supply : will be stated against specific enquiry.
    • 3. Delivery : ex-works Bangalore.
    • 4. Payment : against delivery.
    • 5. Packing and forwarding : extra.
    • 6. Validity : 90 days
    • 7. Other levies : if applicable will be extra to your account
    • 8. Rates quoted are for delivery at Bangalore Others will be extra as actuals.